Original Article（論文） 

  1. 山末英嗣，松八重一代，中島謙一，醍醐市朗，石原慶一：「使用済み自動車から得られる鉄スクラップの関与物質総量」，鉄と鋼，Vol.100, No.6, (2014), pp.774-783
  2. Eiji Yamasue, Kazuhiro Nagata, Tadahiro Inazumi: “Metallurgical Evaluation of Farmer’s Steelmaking in Finland” ISIJ International, Vol.54, No.5 (2014), pp.1024-1029
  3. D. Shiba, E. Yamasue, K. N. Ishihara and H. Okumura: “Effect of process control agents (PCAs) on mechanochemical processes and contamination science “, Materials Science Forum Vols. 783-786 (2014) pp 2665-2670
  4. Hoang-Long Le, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara: “Improving sustainable recovery of metals from waste printed circuit boards by the primary copper smelter process”, Journal of Material Cycles and Waste Management, Volume 16, Issue 2, (2014) pp 298-305
  5. Cravioto C. Jordi, Yamasue Eiji, Okumura Hideyuki and Ishihara Keiichi N.: “Energy Service Satisfaction in two Mexican Communities: a study on demographic, household, equipment and energy related predictors”, Energy policy, (accepted)
  6. Samia Tabassum, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Damp heat stability of AZO transparent electrode and influence of thin metal film for enhancing the stability”, Journal of Materials Science: Materials in Electronics, (accepted)
  7. Ichiro Daigo, Kenichi Nakajima, Masaaki Fuse, Eiji Yamasue and Koichi Yagi: “Sustainable Materials Management on the basis of Relationship between Materials’ Properties and Human Needs”, Matériaux & Techniques, (accepted)
  8. 山末英嗣，清水謙二，永田和宏：「蒸気輸送法による4CaO•P2O5および3CaO•P2O5の標準生成ギブズエネルギーの直接測定」，鉄と鋼，（accepted）
  9. Luong Nuguyen, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Adhesion Properties of milled CuO-CeO2/α-Al2O3 on Metallic Substrate for Automotive Catalytic Converter”, Particulate Science and Technology, vol.32, issue5, (2014), pp.529-536 (DOI:10.1080/02726351.2014.920442)
  10. Samia Tabassum, Eiji YAMASUE, Hideyuki Okumura, Keiichi N. Ishihara: “Sol-gel and RF sputtered AZO thin films: Analysis of oxidation kinetics in harsh environment”, Journal of Materials Science: Materials in Electronics (JMSE), (accepted) (10.1007/s10854-014-2248-9)

International Conference（国際学会） 

  1. Eiji Yamasue and Kazuhiro Nagata: “Comparison of Finnish, Ethiopian and Japanese Ancient Ironmaking”, ISIJ Meeting, Tokyo, Japan, 21-23 March 2014 (invited)
  2. Ichiro Daigo, Kenichi Nakajima, Masaaki Fuse, Eiji Yamasue, Koichi Yagi: “Sustainable Materials Management on the basis of Relationship between Materials’ properties and Human Needs”, 8th International Conference on Society & Materials, SAM8, Liège, 20-21 May 2014
  3. S. Endo, Eiji Yamasue, H.Okumura, K.N. Ishihara: “Temperature dependence of the Magnetic Field Effect on Photocatalytic Reaction”, International Conference on Environmental Catalyst, Asheville, North Carolina United States of America, 24-27 August 2014
  4. K. N. Ishihara, D. Shiba, Eiji Yamasue and H. Okumura: “A role of process control agent for mechanical milling”, The 15th International Conference on Rapidly Quenched & Metastable Materials, Shanghai, China, 24-28 August, 2014
  5. D. Shiba, Eiji Yamasue and H. Okumura and K. N. Ishihara: “Mechanical Milling of TiO2 and ZnO with Organic Solvents”, The 15th International Conference on Rapidly Quenched & Metastable Materials, Shanghai, China, 24-28 August, 2014
  6. Elizabeth Webeck, Kazuyo Matsubae1, Kenichi Nakajima, Keisuke Nansai, Eiji Yamasue, Tetsuya Nagasaka: “Potential and bottleneck for recovery and recycling of P in steelmaking slag Focusing China, India and Japan”, Sustainable Phosphorus Summit 2014, Le Corum, Montpellier, France, 1-3 September 2014
  7. Tran Duc Huy and Eiji Yamasue: “Circulation of scrap steel in Vietnam and its Quality”, INTERNATIONAL FORUM ON GREEN TECHNOLOGY AND MANAGEMENT (IFGTM) – 2014, Can Tho City, Vietnam, 25-26 September 2014 (http://conference.ctu.edu.vn/)
  8. Eiji Yamasue, K. Matsubae and K. N. Ishihara: “Total Material Requirement of Food Production and Related Materials in Japan”, 11th International Conference onEcoBalance?, Tsukuba, Japan, from 27 to 30 October 2014.
  9. Eiji Yamasue, Kazuyo Matsubae, Kenichi Nakajima, Ichiro Daigo, Shinsuke Murakami and Keiichi N Ishihara: “How should we recycle scrap steel from End-of-Life vehicle in terms of TMR?”, The joint 11th International Society for Industrial Ecology (ISIE) Socio-Economic Metabolism section conference and the 4th ISIE Asia-Pacific conference, Melbourne, Australia, 17-19 November 2014
  10. Eiji Yamasue, Kenichi Nakajima, Shinsuke Murakami, Kazuyo Matsubae and Keiichi N Ishihara: “TMR of Material Production and Recycling for Bottom-up Decoupling”, The joint 11th International Society for Industrial Ecology (ISIE) Socio-Economic Metabolism section conference and the 4th ISIE Asia-Pacific conference, Melbourne, Australia, 17-19 November 2014

Domestic Conference（国内学会） 

  1. 山末英嗣：「リン資源としての鉄鋼スラグ利用」，日本鉄鋼協会第29回歴史を変える転換技術研究会「製鋼スラグの利用に伴う製鉄プロセスの技術改革の歴史と今後の革新的発展」，2014年2月24日（招待講演）
  2. 山末英嗣, 中島謙一, 松八重一代，村上進亮，石原慶一：「日本におけるニッケルおよびステンレス鋼生産の資源端重量」，日本LCA学会春季大会，東京，芝浦工業大学豊洲キャンパス，2014年3月4-6日

Review（総説・解説） 

  1. 松八重一代，久保裕也，山末英嗣，長坂徹也：「製鋼スラグからのリン資源回収の可能性」，環境技術，Vol.43, No.2 (2014), pp.15-21

Book（著書） 

Award（受賞） 

Other （その他）