Brief Information

氏名：山末英嗣（やますえ　えいじ），Eiji YAMASUE
最終学歴：東京工業大学理工学研究科金属工学専攻博士後期課程修了(2000年3月)
Degree （学位）：Ph.D. 博士（工学）, Tokyo Institute of Technology （東京工業大学） March 2000

学位論文

平成11年度 東京工業大学大学院 理工学研究科 金属工学専攻 学位論文
「14族元素液体金属の熱伝導度とその温度依存性」

論文(Original Article)

  1. Eiji YAMASUE, Masahiro SUSA, Hiroyuki FUKUYAMA and Kazuhiro NAGATA: “Non-stationary Hot Wire Method with Silica-Coated Probe for Measuring Thermal Conductivities of Molten Metals”, Metallurgical and Materials Transactions A Vol.30A, August (1999), pp.1971-1979
  2. Eiji YAMASUE, Masahiro SUSA, Hiroyuki FUKUYAMA and Kazuhiro NAGATA: “Thermal conductivities of Silicon and Germanium in Solid and Liquid States Measured by Non-Stationary Hot Wire Method with Silica Coated Probe”, Journal of Crystal Growth, 234, (2002), pp.121-131
  3. 山本将史，深澤恒典，山末英嗣，石原慶一 : 「自動車の燃料消費率の推移とその要因」，粉体および粉末冶金，第49巻，第5号，(2002), p.419
  4. Eiji YAMASUE, Masahiro SUSA, Hiroyuki FUKUYAMA and Kazuhiro NAGATA: “Deviation from Wiedemann-Franz law for Thermal Conductivity of liquid Tin and Lead at Elevated Temperature”, International Journal of Thermophysics, 713-730 MAY 2003 Vo.24, No.3, (2003), pp.713-730
  5. 石原慶一，山末英嗣: 「自己粉砕ねじと家電リサイクルへの応用」，エネルギー資源学会誌，Vol.24, No.3, (2003), pp.184-187
  6. 醍醐市朗、若松貴史、山末英嗣、石原慶一：「仮想摩擦係数を用いた旅客輸送における統合的エネルギー効率の評価」，日本エネルギー学会，Vol.84, No.2 (2005), pp.119-125
  7. 山末英嗣，林宏樹，石原慶一：「小型たたら炉の炉サイズに関する考察」，鉄と鋼，vol.91, No.1, (2005), pp.1-7
  8. F. N. Ishikawa, K. Irie, E. Yamasue, K. N. Ishihara, H. Okumura: “Mechanical alloying and nitrogen storage properties of Ca-Fe powder”, Journal of Alloys and Compounds, 395, (2005), 159-165
  9. V. Bhattacharya, E. Yamasue, K. N. Ishihara, K. Chattopadhyay: “On the origin and stability of the metastabe phase in rapidly solidified Sn-Bi alloy particles embedded in Al matrix”, Acta Materilia, vol.53 No.17, OCT (2005), pp.4593-4603
  10. 邑瀬邦明、石田雅人、江森郁子、山末英嗣、平藤哲司、栗倉泰弘：「Ni-Mo/TiO2複合めっきとその光触媒特性」，表面技術, Vol.56, No.11, (2005), pp.692-697
  11. 村橋勲，山末英嗣：「エチオピア西南部の製鉄技術と鉄器使用」，物質文化, vol.81, No.6, (2006), pp.1-20
  12. 山末英嗣，中島謙一，奥村英之，石原慶一：「新製品への代替を考慮した家電製品の廃棄台数予測」，日本金属学会誌, vol.70, No.8, (2006), pp.611-614
  13. Eiji YAMASUE, Hironori YAMAGUCHI, Hideyuki OKUMURA and Keiichi N. ISHIHARA: “Decomposition of Carbon Dioxide into Carbon using Mechanically milled Magnetite”, Journal of Alloys and Compounds, vol.434-435, (2007), pp.803-805
  14. K. N. Ishihara, F. Kubo, K. Irie, K. Shichi, E. Yamasue and H. Okumura: “Mechanical Alloying of Lithium-base Systems”, Journal of Alloys and Compounds, vol.434-435, (2007), pp.542-545
  15. H. Okumura, F. N. Ishikawa, Y. Morotomi, E. Yamasue, K. N. Ishihara: “Mechanical alloying, nitrogen storage and magnetization of Ca-Co powder”, Materials Science and Engineering A, vol.449-451 (2007) 1123-1126
  16. E. Yamasue, H. Yamaguchi, A. Nakaoku, H. Okumura and K. N. Ishihara: “Carbon Dioxide Reduction into Carbon by Mechanically-milled Wustite”, Journal of Materials Science, vol.42, (2007), pp.5196-9202
  17. K.N. Ishihara, K. Irie, F. Kubo, E. Yamasue, H. Okumura: “Mechanical milling of Fe-Li and Cu-Li systems and their nitrogen absorption properties”, Materials Science and Engineering A, vol.449-451 (2007) 1067-1070
  18. T. Yokoi, E. Yamasue, H. Okumura and K. N. Ishihara: “Mechanical Milling of Lithium with Metal Oxide and its Reactivity with Gases”, Materials Science Forum Vols. 534-536 (2007) pp. 197-200
  19. 山末英嗣，村橋勲，奥村英之，石原慶一：「エチオピア西南部における製鉄および鍛冶技術の冶金学的検証」，日本金属学会誌, Vol.48, No.9, (2007) 763-771
  20. Eiji Yamasue, Kenichi Nakajima, Ichiro Daigo, Seiji Hashimoto, Hideyuki Okumura and Keiichi N. Ishihara: “Evaluation of the Dissipated Amounts of Rare Metals from WEEE in Japan”, Materials Transaction, JIM, vol.48, No.9 (2007), pp.2353-2357
  21. 早渕百合子、山末英嗣、奥村英之、石原慶一：「エネルギー・環境教育の波及効果の検討」、エネルギー環境教育、No.2 (2007) pp.61-67
  22. 山末英嗣，延原功一，邑瀬邦明，石原慶一：「アナターゼ型酸化チタンのメカニカルミリングによる結晶構造変化および生成相の光触媒能」，粉体および粉末冶金学会誌, Vol.54, No.10, (2007), pp.686-693
  23. 原康祐，山末英嗣，奥村英之，石原慶一：「メカニカルアロイングによるTiOの合成における吸着水の影響」，粉体および粉末冶金学会誌，第55巻，1号, (2008) pp.26-32
  24. Duc-Quang Nguyen, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Evaluation of Recycling System for Electronic Appliances in Vietnam”, Development Engineering, vol.14, (2008) 1-13
  25. Keiichi N. Ishihara, Fumie Kubo, Eiji Yamasue and Hideyuki Okumura: Formation of supersaturated Fe-Li solid solution by mechanical alloying, Reviews on Advanced Materials Science, Vol.18, (2008), pp.284-288
  26. 山末英嗣, 中島謙一, 醍醐市朗, 松八重（横山）一代，橋本征二, 奥村英之，石原慶一：「家電製品の廃棄に伴うレアメタルの潜在的拡散量評価」，日本金属学会誌，72巻，8号，(2008), pp.587-592
  27. Duc-Quang Nguyen, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara, “Use and disposal of large home electronic appliances in Vietnam”, Journal of Material Cycles and Waste Management,Vol.11, (2009), 358-366
  28. Kosuke O. Hara, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara “Phase stability under high-energy ball milling in the Ti-O system”, Journal of Physics: Conference Series, vol.144, (2009), 012021
  29. 山末英嗣，沼田健，奥村英之，石原慶一：「使用済み携帯電話およびパーソナルコンピュータに含まれるレアメタル量の推計とそのインパクト評価」”Impact Evaluation of Rare Metals in Waste Mobile-Phone and Personal Computer”, 日本金属学会誌，Vol.73, No.3, (2009), 198-204
  30. Eiji Yamasue, Ryota Minamino, Takeshi Numata, Kenichi Nakajima, Shinsuke Murakami, Ichiro Daigo, Seiji Hashimoto, Hideyuki Okumura and Keiichi N. Ishihara：”Novel Evaluation Method of Elemental Recyclability from Urban Mine, ~Concept of Urban-ore TMR ~”, Materials Transactions，Vol.50, No.6, (2009), pp.1536-1540
  31. Seon-Hong Lee, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara: “Preparation of N-doped TiOx films as photocatalyst using reactive sputtering with dry air”, Materials Transactions，Vol.50, No.8, (2009), 1805-1811
  32. Eiji Yamasue, Ryota Minamino, Ichiro Daigo, Hideyuki Okumura and Keiichi N. Ishihara：”Evaluation of Total Materials Requirement for the Recycling of Elements and Materials (Urban Ore TMR) from End-of-Life Electric Home Appliances”, Materials Transactions，vol.50, No.9, (2009), 2165-2172，
    （社団法人日本金属学会第12回若手講演論文賞）
  33. Seon-Hong Lee, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara: “Effect of oxygen and nitrogen concentration of nitrogen doped TiOx film as photocatalyst prepared by reactive sputtering”, Applied Catalysis A: General，Vol.371, Issues 1-2, (2009), pp.179-190
  34. Seon-Hong Lee, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara: “Photocatalysis and surface doping states of N-doped TiOx filmsg prepared by reactive sputtering with dry air”, Applied Catalysis B: Environmental, Vol.93, No.3-4, (2010), pp.217-226
  35. Hideyuki Okumura, Kayo Arai, Yuichi Nishiyama, Eiji Yamasue, and Keiichi N. Ishihara: “Revisiting Carbon Based Metallic Compounds – Nanoscale Surface Science and Environmental Catalysis”, Materials Science Forum Vols. 638-642 (2010) pp. 858-863
  36. Shinichiro NAKAMURA, Eiji YAMASUE: “Hybrid LCA of a DfD technology: Active Disassembling Fasteners using Hydrogen Storing Materials implemented to Home Electric Appliances”, Environmental Science & Technology, Vol.44, (2010), pp.4402-4408
  37. 南埜良太，山末英嗣，中島謙一，村上進亮，奥村英之，石原慶一：「ノートパソコンおよび携帯電話からの金属およびプラスチックリサイクルに必要なTMR(都市鉱石TMR)の算出と評価，Evaluation of Total Materials Requirement for the Recycling of Elements (Urban Ore TMR) from Laptop PC and Mobile Phone」，日本LCA学会誌，第６巻，３号，(2010), pp.251-258（社団法人日本LCA学会第2回学会賞（論文賞））
  38. 谷川寛樹，山末英嗣，稲津亮，前新将：「4d-GISを用いた都市重量の変化と建設資材のリサイクル性に関する検討」，土木学会環境システム研究論文集，vol.38, No.9, (2010), pp.413-419 (土木学会環境システム研究会 優秀論文賞)
  39. 山末英嗣，南埜良太，沼田健，中島謙一，村上進亮，醍醐市朗，橋本征二，奥村英之，石原慶一：「都市鉱山からの元素・材料のリサイクル性に関する新規評価手法　―都市鉱石TMR―」，日本金属学会誌，第74巻，11号，(2010), pp.718-723
  40. Fumiaki N. Ishikawa, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Investigations on the Nitrogen Storage Property of LaNi5 powder” J. Alloys and Compounds, (2010), pp.4375-4380
  41. 山末英嗣，南埜良太，醍醐市朗，奥村英之，石原慶一：「使用済み家電製品からの素材リサイクルに伴う関与物質総量（都市鉱石TMR）の推算と評価」，日本金属学会誌，第74巻，12号，(2010), pp. 811-819
  42. Masaaki Fuse, Eiji Yamasue, Barbara Reck and Thomas Graedel：”Regional Development or Resource Preservation? A Perspective from Japanese Appliance Exports”, Ecological Economics, 70, (2011), pp.788-797, (doi:10.1016/j.ecolecon.2010.11.017)
  43. Eiji YAMASUE, Isao MURAHASHI and Keiichi N. ISHIHARA: ” Traditional Steelmaking in Southwestern Ethiopia: A Metallurgical Analysis”, Nile Ethiopian Studies, vol.14, (2010), pp.1-18
  44. K. O. Hara, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Dynamic Equilibrium of MoSi2 Polymorphs during Mechanical Milling”, J. Alloys and Compounds, Volume 509, Supplement 1, June 2011, pp.S243-S246
  45. Ndumiso G. Dlamini, Kenta Fujimura, Eiji Yamasue, Hideyuki Okumura & Keiichi N. Ishihara: “The environmental LCA of steel vs HDPE car fuel tanks with varied pollution control”, International Journal of Life Cycle Assessment, vol. 16 (2011), pp.410-419, DOI 10.1007/s11367-011-0277-7
  46. Supawan Joonwichien, Eiji Yamasue, Hideyuki Okumura and Keiichi Ishihara, Effects of Magnetic Field on Photodegradation of Methylene Blue over ZnO and TiO2 Powders using UV-LED as a Light Source, J. Chem. Chem. Eng. 5 (2011) 729-737.
  47. Supawan Joonwichien, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara, “Magnetic field effects on photodecomposition of methylene blue over ZnO particles”, RSC Advances, The Royal Society of Chemistry, vol.1 (2011) pp.1060-1063
  48. Supawan Joonwichien, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Effect of Static Magnetic Field on Photocatalytic Degradation of Methylene Blue over ZnO and TiO2 Powders”, Applied Magnetic Resonance, Vol.42, (2012), pp.17-28, DOI 10.1007/s00723-011-0270-0
  49. Ndumiso Dlamini, Eiji Yamasue, Hideyuki Okumura Keiichi N. Ishihara: “Technical Impact Indicators for Materials”, Revue de Métallurgie, vol.109, (2012), pp.305-321, DOI: 10.1051/metal/2012034
  50. Kosuke O. Hara, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Molecular Dynamics Study of the Milling-Induced Allotropic Transformation in Cobalt”, Philosophical Magazine, 92 (2012) pp.2117-2129
  51.  Keiichi N. Ishihara, Eiji Yamasue, Hideyuki Okumura and Kosuke O. Hara: “Milling Induced Polymorphic Transformation in MoSi2”, International Journal of Materials Research (formerly: Zeitschrift fuer Metallkunde) Vol.103 (2012) 1130-1136 (DOI: 10.3139/146.110772)
  52. Kosuke O. Hara, Tomoya Fujii, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Phase Stability of -MoSi2-x Prepared by the Na Flux Method against Thermal, Oxidative and Mechanical Treatments”, Journal of Materials Science, vol.48, issue 8, (2013), pp.3121-3127, DOI: 10.1007/s10853-012-7089-4
  53. Eiji Yamasue, Ryota Minamino, Ichiro Daigo, Hiroki Tanikawa, Hideyuki Okumura, Keiichi N. Ishihara and Paul. H Brunner: “Quality Evaluation of Scrap Materials from Urban Buildings by means of Total Materials Requirement”, Journal of Industrial Ecology, Vol. 17, Issue 4, (2013), pp. 555-565, DOI: 10.1111/jiec.12014
  54. Eiji Yamasue, Kazuyo Matsubae, Kenichi Nakajima, Seiji Hashimoto, Tetsuya Nagasaka: “Using Total Material Requirement to Evaluate the Potential for Recyclability of Phosphorous in Steelmaking Dephosphorization Slag”, J. Industrial Ecology, Vol.17, Issue 5, (2013), pp.722-730, DOI: 10.1111/jiec.12047
  55. Hoang-Long Le, Eiji YAMASUE, Hideyuki Okumura, and Keiichi N. Ishihara: “Model for Evaluating Metal Recovery Efficiency of Complex Scraps (MEMRECS) – A Promising Measure for Calculation of Metal Recyclability”, International Journal of Arts & Sciences, 6 (1), (2013) 73-87
  56. H. Le, Eiji YAMASUE, H. Okumura and K. Ishihara, “MEMRECS—A Sustainable View for Metal Recycling from Waste Printed Circuit Boards,” Journal of Environmental Protection, Vol. 4, No. 8, 2013, pp. 803-810. doi: 10.4236/jep.2013.48094.
  57. Cravioto C. Jordi, Yamasue Eiji, Okumura Hideyuki and Ishihara Keiichi N.: “Road transport externalities in Mexico: Estimates and international comparisons”, Transport policy, Vol.30, (2013), pp. 63-76
  58. Eiji Yamasue, Kenji Shimizu, Kazuhiro Nagata: “Direct Determination of Standard Gibbs Energies of the Formation of 4CaO•P2O5 and 3CaO•P2O5 by Transpiration Method”, ISIJ International, Vol.53, No.10, (2013), pp.1833-1840
  59. D. Shiba, E. Yamasue, K. N. Ishihara and H. Okumura: “Effect of process control agents (PCAs) on mechanochemical processes and contamination science “, Materials Science Forum Vols. (under reviewing)
  60. 山末英嗣，松八重一代，中島謙一，醍醐市朗，石原慶一：「使用済み自動車から得られる鉄スクラップの関与物質総量」，鉄と鋼，Vol.100, No.6, (2014), pp.774-783
    61. Eiji Yamasue, Kazuhiro Nagata, Tadahiro Inazumi: “Metallurgical Evaluation of Farmer’s Steelmaking in Finland” ISIJ International, Vol.54, No.5 (2014), pp.1024-1029
  61. Hoang-Long Le, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara: “Improving sustainable recovery of metals from waste printed circuit boards by the primary copper smelter process”, Journal of Material Cycles and Waste Management, Volume 16, Issue 2, (2014) pp 298-305
  62. Cravioto C. Jordi, Yamasue Eiji, Okumura Hideyuki and Ishihara Keiichi N.: “Energy Service Satisfaction in two Mexican Communities: a study on demographic, household, equipment and energy related predictors”, Energy policy, vol.73, (2014), pp.110-126
  63. Samia Tabassum, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Damp heat stability of AZO transparent electrode and influence of thin metal film for enhancing the stability”, Journal of Materials Science: Materials in Electronics, vol.25 (2014), pp.3203-3208
  64. Le, H.L., YAMASUE, E., Okumura, H., Ishihara, K.N.: “Assessment of metal recovery efficiency for waste printed circuit boards in Vietnam with MEMRECS and different end-of-life scenarios”, Journal of Solid Waste Technology and Management, 40 (2), (2014), pp. 100-116.
  65. Ichiro Daigo, Kenichi Nakajima, Masaaki Fuse, Eiji YAMASUE and Koichi Yagi: “Sustainable Materials Management on the basis of Relationship between Materials’ Properties and Human Needs”, Matériaux & Techniques, Vol.112, No. 5 (2014), pp.506-510 (http://dx.doi.org/10.1051/mattech/2014034)
  66. Samia Tabassum, Eiji YAMASUE, Hideyuki Okumura, Keiichi N. Ishihara: “Sol-gel and RF sputtered AZO thin films: Analysis of Oxidation Kinetics in Harsh Environment”, Journal of Materials Science: Materials in Electronics (JMSE), Vol.25, (2015), pp.4883-4888, (10.1007/s10854-014-2248-9)
  67. Luong Nguyen, Eiji YAMASUE, Hideyuki Okumura and Keiichi N. Ishihara: “Adhesion Properties of milled CuO-CeO2/α-Al2O3 on Metallic Substrate for Automotive Catalytic Converter”, Particulate Science and Technology, vol.32, issue5, (2014), pp.529-536 (DOI:10.1080/02726351.2014.920442)
  68. Jorge Gomez-Paredes, E YAMASUE, H. Okumura and Keiichi N. Ishihara: “The Labour Footprint – An input-output approach to evaluate labour-related issues”, Economic Systems Research, (2015), pp. (10.1080/09535314.2014.998173)
  69. 山末英嗣，清水謙治，永田和宏：「蒸気輸送法による4CaO・P2O5および3CaO・P2O5の標準生成ギブズエネルギーの直接測定」，鉄と鋼，第101巻，第3号, (2015), pp.169-176
  70. Hideyuki Okumura, Susumu Endo, Supawan Joonwichen, Eiji YAMASUE, and Keiichi N. Ishihara: “Magnetic Field Effect on Heterogeneous Photocatalysis”, Catalysis Today, (2015) http://dx.doi.org/10.1016/j.cattod.2014.12.048
  71. Eiji YAMASUE, Kazuyo Matsubae and Keiichi N. Ishihara: “Weight at Source for Phosphorous Fertilizer Production”, Global Environmental Research, Vol.19, No.1 (2015) pp.97-104

Proceedings （国際会議発表論文）

  1.  Eiji YAMASUE, Masahiro SUSA, Miyuki HAYASHI, Hiroyuki FUKUYAMA and Kazuhiro NAGATA: Contributions from Phonon an Electron to Thermal Conductivities of Solid and Liquid Silicon, Book of Abstracts of the 15th European Conference on Thermophysical Properties, Wurzburg, September 5-9, (1999), p.384
  2. Hiroyuki FUKUYAMA, Eiji YAMASUE, Miyuki HAYASHI, Masahiro SUSA and Kazuhiro NAGATA: “Challenge to Thermal Conductivity Measurement of Liquid Silicon under Microgravity”, Proceeding of the Twenties Japan Symposium on Thermophysical Properties, October 20-22, Tokyo, (1999) pp.280-283
  3. Eiji YAMASUE, Masahiro SUSA, Hiroyuki FUKUYAMA and Kazuhiro NAGATA: “Deviation from Wiedemann-Franz law for Thermal Conductivity of liquid Tin and Lead at Elevated Temperature”, 16th European Conference on Thermophysical Properties, London, September 1-4, (2002)
  4. K. N. Ishihara, K. Shichi, F. Kubo, K. Irie, E. YAMASUE, H. Okumura: “Mechanical Milling of Lithium Alloy Systems and its Nitrogen Absorption Properties”, The 12th International Conference on Rapidly Qenched & Metastable Materials, Jeju, KOREA, August 21-26, (2005), p.125
  5. H. Okumura, Y. Morotomi, F. N. Ishikawa, E. YAMASUE, K. N. Ishihara: “Mechanical alloying and nitrogen storage properties of Ca-Co powder”, The 12th International Conference on Rapidly Quenched & Metastable Materials, Jeju, KOREA, August 21-26, (2005), p.137
  6. Yuriko Hayabuchi, Yosuke Enomoto, Eiji YAMASUE, Hideyuki Okumura and Keiichi N. Ishihara: “The role of environmental education and social system on the plastic bag problem”, Proceedings of 3rd Conference on the Public Sector, Ljubljana, SLOVENIA, June 30-July 2, 2005, pp.29-41
  7. Eiji YAMASUE, Hironori YAMAGUCHI, Hideyuki OKUMURA and Keiichi N. ISHIHARA: “Decomposition of Carbon Dioxide into Carbon using Mechanically milled Magnetite”, 12th International Symposium on Metastable and Nano Materials (ISMANAM2005), Paris, France 3 -7 July (2005), p.PI-113
  8. Keiichi N. ISHIHARA, Fumie KUBO, Kohei IRIE, Kazuyoshi SHICHI, Eiji YAMASUE and Hideyuki OKUMURA: “Mechanical Alloying of Lithium-base Systems”, 12th International Symposium on Metastable and Nano Materials (ISMANAM 2005), Paris, France 3 -7 July (2005), p.7-C-I-i1
  9. H. Okumura, E Yamasue, Y. Nishiyama and K. N. ISHIHARA: “NO2 adsorption and decomposition by SiC powder”, Engineering Conference International, “NANOSTRUCTURED MATERIALS: Environmental, Energy and Sensing Applications”, Barga, Italy 18-23 September (2005)
  10.  H. Okumura, Y. Nishiyama, R. Itoh, E. Yamasue, K. N. Ishihara: “Decomposition of NO2 gas by SiC thin film and powder”, NANO-2006, Eighth International Conference on Nanostructured Materials, Bangalore, INDIA, 20-25, August (2006), p.124
  11.  T. Yokoi, E. Yamasue, H. Okumura and K. N. Ishihara: “Mechanical Milling of Lithium with Metal Oxide and its Reactivity with Gases”, PM2006 POWDER METALLURGY World Congress & Exhibition, Busan Korea, 24-28 September, (2006), p.959-960
  12. Keiichi N. ISHIHARA, Fumie KUBO, Eiji YAMASUE and Hideyuki OKUMURA: “Supersaturated Solid Solution Formation of Fe-Li by Mechanical Alloying”, 13th International Symposium on Metastable and Nano Materials (ISMANAM 2006), Warsaw, Poland 29-31 August (2006)
  13. Y. Hayabuchi, E. Yamasue, H. Okumura and K. N. Ishihara: “Examination on environmental behavior for sustainable society”, Future Matters: Futures Known, Created and Minded, An International Conference, Cardiff University UK, September 4 – 6, (2006)
  14. Seiji Hashimoto, Ichiro Daigo, Kenichi Nakajima, Masaaki Fuse, Shinsuke Murakami, Kazuyo Yokoyama, Eiji YAMASUE, Wakana Tamaki, Osamu Umezawa: “Preliminary idea of Material Stock Accounts: objectives, system boundary, and categories of stocked materials”, The 2006 ConAccount meeting “Dematerialization across scales: Measurement, empirical evidence, future options”, Vienna, Austria, September 13-14, ConAccount Meeting Abstract Reader, (2006), p.12
  15. Eiji YAMASUE, Kenichi NAKAJIMA, Hideyuki OKUMURA and Keiichi N. ISHIHARA: “Estimation of the dissipated amount of rare metals in discarded electric home appliances in Japan”, Proceedings of Care Innovation 2006, Wein, Austria 13-16 November (2006), p.16
  16. S. Umeda, E. Yamasue, H. Okumura and K. N. Ishihara: “Estimation of CO2 Emission from Airplane Idlingon Airport Ground”, The 8th Kyoto University International Symposium, Towards Harmonious Coexistence within Human and Ecological Community on this Planet, Bangkok, Thailand, 23-25 November (2006)
  17. Nguyen Duc Quang, Eiji YAMASUE, Hideyuki Okumura, Keiichi N. Ishihara: “Wastes of Electronic and Electric Equipment (WEEE) recycling system in Vietnam: A case study on copper recycling”, The 8th Kyoto University International Symposium, Towards Harmonious Coexistence within Human and Ecological Community on this Planet, Bangkok, Thailand, 23-25 November 2006
  18. Eiji YAMASUE, Kenichi Nakajima, Ichiro Daigo, Kazuyo Yokoyama, Wakana Tamaki, Seiji Hashimoto, Nguyen Duc Quang, Hideyuki Okumura and Keiichi N. Ishihara: “The potential amounts of recovered materials from waste electrical and electronic equipments using self-disassembling fastener”, The International Society for Industrial Ecology, ISIE conference 2007, University of Tronto, Canada, 17-20, June (2007) , p.351
  19. YOKOYAMA Kazuyo, NAKAJIMA Kenichi, YAMASUE Eiji, NANSAI Keisuke, NAGASAKA Tetsuya: “The effect of contamination of tramp elements on ferrous material flow: Analysis by Dynamic Waste Input Output Model”, The International Society for Industrial Ecology, ISIE conference 2007, University of Tronto, Canada, 17-20, June (2007), p.354
  20. E. Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: ” The Flow Analyses of Rare Metals in the Shipped, Stocked and Waste Electrical and Electronic Appliances “, International Symposium on Sustainable Energy & Materials, Ishigaki Okinawa, Japan, Nobumoto Ohama Memorial Hall, 29 Oct.-1 Nov (2007)
  21. T. Numata, E. Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Scenario Analysis of Recoverable Elements from waste Laptop-PC and Cell-phone”, International Symposium on Sustainable Energy & Materials, Ishigaki Okinawa, Japan, Nobumoto Ohama Memorial Hall, 29 Oct.-1 Nov (2007)
  22. Eiji Yamasue, Nguyen Duc Quang, Hideyuki Okumura and Keiichi N. Ishihara: “Use and Obsolescence of Large Home Electronic Appliances in Vietnam”, The Fourth NIES Workshop on E-waste, Tsukuba Japan (Tsukuba International Congress Center), 21-22 November (2007) (invited)
  23. Nguyen Duc Quang, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara: “Study on disposal of large home electronic appliances in Vietnam”, The 5th Eco-Energy and Materials Science and Engineering Symposium (5th EMSES), Pattaya, Thailand, 21-24 November (2007), pp.124-129
  24. Ndumiso Dlamini, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara: “Technical Impact Indicators for Materials: Definition and Use”, 2nd International Seminar on Society and Materials, 24-25 April 2008, Nantes, France
  25. Seon-hong Lee, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara “NOx decomposition of the N-doped TiOx films using RF sputtering in air” A Pre-Symposium of 14th International Congress on Catalysis (ICC 14), Kyoto, Japan, 8-12 July (2008)
  26. R. Ito, R. Minamino, E. Yamasue, K. N. Ishihara and H. Okumura “Evaluation of room temperature catalysis of SiC and carbon through NOx decomposition”, A Pre-Symposium of 14th International Congress on Catalysis (ICC 14), Kyoto, Japan, 8-12 July (2008)
  27. Seon-hong Lee, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara “NOx decomposition of the N-doped TiOx films using RF sputtering in air” 14th International Congress on Catalysis (14th ICC), Seoul, Korea, 13-18 July (2008)
  28. Kosuke O. Hara, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara “Phase stability under high-energy ball milling in the Ti-O system” The 13th International Conference on Rapidly Quenched & Metastable Materials (RQ13), Dresden, Germany, 24-29 August, (2008)
  29. E. Yamasue, K. Yokoyama, Y. Kondo, S Nakamura and K. N. Ishihara : ” Hybrid (WIO) LCA of the Introduction of Active Disassembling Fasteners using Hydrogen Storing Materials into Electric and Electronic Equipments”, Electronics Goes Green 2008+, Berlin Germany 8-10 September (2008)
  30. E. Yamasue, T. Numata, S. Hashimoto, H. Okumura and K. N. Ishihara: “Evaluation of Elemental Grade in Waste Electric and Electronic Equipments (WEEE) as Urban Mine using Total Materials Requirement”, Book of proceedings, ConAccount 2008, Prague, Czech, 11-12 September 2008, pp.205-214
  31. Eiji Yamasue: “Study on Resource Management Strategy Using A Novel Index for Recyclability Evaluation, ~Urban-Ore TMR”, The fifth NIES workshop on E-waste, Mielparque Kyoto, Japan, 17, November 2008 (invited)
  32. Eiji Yamasue, Ryota Minamino, Takeshi Numata, Shinsuke Murakami, Kenichi Nakajima, Hideyuki Okumura and Keiichi N. Ishihara: “:Evaluation of Recyclability in Electronic Appliances using Natural-ore-Equivalent-Elemental-Concentration based on Urban-mine TMR”, The 8th International Conference on Ecobalance Proceedings, Tokyo, Japan, 10-12 December 2008, C-09
  33. Seiji Hashimoto, Ichiro Daigo, Shinsuke Murakami, Kazuyo Matsubae-Yokoyama, Masaaki Fuse, Kenichi Nakajima, Masahiro Oguchi, Hiroki Tanikawa, Tomohiro Tasaki, Eiji Yamasue and Osamu Umezawa: “Framework of Material Stock Accounts; Toward Assessment of Material Accumulation in the Economic Sphere”, The 8th International Conference on Ecobalance Proceedings, Tokyo, Japan, 10-12 December 2008, C-08
  34. Ndmiso Dlamini, E. Yamasue, H. Okumura and K. N. Ishihara: “Annual life Cycle Network Energy Burden of Materials”, The 8th International Conference on Ecobalance Proceedings, Tokyo, Japan, 10-12 December 2008, E-11
  35. Kazuyo MATSUBAE-YOKOYAMA, Kyouhei ONO, Kenichi NAKAJIMA, Eiji Yamasue and Tetsuya NAGASAKA: “WIO Analysis on Steel Recycling Considering Accompanying Substances”, The 8th International Conference on Ecobalance Proceedings, Tokyo, Japan, 10-12 December 2008, G-04
  36. Tran Duc Huy, Nurulakmal Mohd Sharif, Zuhailawati Hussain, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Characterization of new FeAl alloy composite prepared by powder metallurgy route”, The 1st Regional Conference of Materials, Malaysia, (2008), p.46
  37. S Nakamura and E Yamasue: A hybrid LCA of the introduction of Active Disassembling Fasteners made of Hydrogen Storing Materials into Home Appliances, Industrial Ecology Programme, NTNU, Trondheim Norway, 24. April 2009
  38. S Nakamura and E Yamasue: Environmental Implications of the Implementation of Active Disassembling Fasteners to Home Electric Appliances: a Hybrid LCA based on WIO, Section Ecological Systems Design, ETH, Zurich, Switzerland, 5. May 2009.
  39. Supawan Joonwichien, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Magnetic Field Effect on Photocatalytic Reaction With TiO2 and ZnO”, World Renewable Energy Congress 2009 – Asia, The 3rd International Conference on “Sustainable Energy and Environment (SEE 2009)”, 18-23 May 2009, Bangkok, Thailand
  40. Eiji Yamasue, Ryota Minamino, Hiroki Tanikawa, Ichiro Daigo, Hideyuki Okumura and Keiichi N. Ishihara: “Material Recyclability Evaluation of Urban Structures using Urban-ore TMR”, Book of Abstract for International Society of Industrial Ecology conferene 2009 (ISIE 2009), Lisbon, Portugal, 21-24 June 2009, p.193
  41. Ryota Minamino, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Evaluation of Recyclability of Elements and Materials in Electric Home Appliances using Urban-ore TMR”, Book of Abstract for International Society of Industrial Ecology conferene 2009 (ISIE 2009), Lisbon, Portugal, 21-24 June 2009, p.357
  42. Eiji Yamasue, Kazuyo Matsubae, Yasushi Kondo, ○Shinichiro Nakamura and Keiichi N. Ishihara: “Evaluation of the Introduction of Active Disassembling Fasteners using Hydrogen Storing Materials in Electronic Appliances: An LCA by the Waste IO Method”, Book of Abstract for International Society of Industrial Ecology conferene 2009 (ISIE 2009), Lisbon, Portugal, 21-24 June 2009, p.256
  43. H. Okumura, K. Arai, Y. Nishiyama, E. Yamasue, and K. N. Ishihara: “Revisiting Carbon Based Metallic Compounds – Nanoscale Surface Science and Environmental Catalysis”, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (THERMEC’2009), August 25-29, 2009, MARITIM Hotel Berlin, Germany, (in print)
  44. Eiji Yamasue, Kazuyo Matsubae, Yasushi Kondo, ○Shinichiro Nakamura and Keiichi N. Ishihara: “Environmental Effects of the Introduction of Active Disassembling Fasteners made of Hydrogen Storing Materials into Electric and Electronic Home Appliances: a Hybrid LCA based on WIO”, R’09 Twin World Congress, Davos, Switzerland, 14-16 September 2009
  45. S Nakamura and E. Yamasue: Hybrid LCA of a Design for Disassemble technology: Active Disassembling Fasteners of Hydrogen Storage Alloys for Home Appliances, Institute for Systems Science, Innovation & Sustainability Research University of Graz, 17. November 2009
  46. K. O. Hara, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara “Phase Transformation Induced by Mechanical Milling in MoSi2”, 7th Eco-Energy and Materials Science and Engineering Symposium, Chiang-Mai, Thailand 19-22 Nov. 2009
  47. D. Thi Luyen , E. Yamasue, H. Okumura, K.N. Ishihara: “Investigation of Electrochemical Behaviors of Iridium Oxide pH Sensor”. 8th International Symposium on Electrochemical Impedance Spectroscopy (EIS2010), June 6-11, 2010, Algarve, Potugal.
  48. K. O. Hara, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Dynamic Equilibrium of MoSi2 Polymorphs during Mechanical Milling”, 17th International Symposium on Metastable, Amorphous and Nano-structured Materials (ISMANAM 2010), Swiss Federal Institute of Technology (ETH Zurich), Zurich, Switzerland, 4-7 July 2010
  49. Supawan Joonwichien, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Magnetic Field Effect on Photodegradation of Organic Matter over ZnO and TiO2 Powders using UV-LED as a Light Source”, The 13th Asia Pacific Confederation of Chemical Engineering Congress (APCChE2010), October 5-8, 2010, Taipei, Taiwan
  50. D. Thi Luyen , E. Yamasue, H. Okumura, K.N. Ishihara: “Effect of Oxidation Temperature on pH Sensing Performance of Iridium Oxide Electrodes”., The 9th Annual IEEE Conference on Sensors, November 1-4, 2010, Hawaii, USA.
  51. E. Yamasue, R. Minamino, K. Matsubae, M. Fuse, H. Okumura and Keiichi N. Ishihara: “The Grade of Materials in Urban Mine in terms of Total Materials Requirement ~ A Comparison among Electronics, Urban Buildings and Vehicle ~”, International Conference on Ecobalance (Ecobalance 2010), 9-11 November 2010, Tokyo, Japan.
  52. Eiji Yamasue, Kazuyo Matsubae-Yokoyama, Kenichi Nakajima, Tetsuya Nagasaka: “Total Material Requirement of Phosphorus Reclaimed from Steel Making Slag”, ISIE MFA-ConAccount Meeting, 7-9 November 2010, Tokyo Japan.
  53. Eiji Yamasue and Isao Murahashi: “Comparison of Ancient Ironmaking between Japan and Ethiopia”, The 160th ISIJ Meeting, 25-27 September 2010, Sapporo, Japan.
  54. Supawan Joonwichien, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “ Effect of Static Magnetic Field on Photocatalytic degradation of Methylene Blue over ZnO and TiO2 Powders”, The 12th International Symposium on Spin and Magnetic Field Effects in Chemistry and Related Phenomena ” Spin Chemistry Meeting 2011 (SCM2011)”, May 15-20, 2011, Noordwijk, The Netherlands.
  55. Eiji Yamasue, Kazuyo Matsubae, Kenichi Nakajima, Tetsuya Nagasaka: “Recyclability Evaluation of Phosphorous from Steel Making Slag in terms of Total Materials Requirement”, ISIE 2011, 6-10 June 2011, Barkeley, USA.
  56. Keiichi N. Ishihara, Eiji Yamasue, Hideyuki Okumura and Kosuke O. Hara: “Milling Induced Polymorphic Transformation in MoSi2”, The 14th International Conference on Rapidly Quenched and Metastable Materials, Salvador, BA, Brazil, 28 August to 02 September 2011
  57. Daisuke Shiba, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara:”Influence of Ionic Liquids as a Process Control Agent on Ball Milling Process”, Ajou-KIT-Kyoto University Joint International Symposium, Kihada Hall, Obaku Plaza, Kyoto University Uji Campus, Kyoto, Japan, 31 January-1 February, 2012
  58. Nguyen The Luong, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara: “Catalytic Performance of Pd, Pt and Rh loaded on CuO-CeO2 Washcoat”, 15th International Congress on Catalysis 2012. International Congress Center Munich, Munich, Germany,1-6 Juli, 2012
  59. H. Okumura, S. Joonwichien, S. Endoh, T. Tani, Eiji Yamasue, K. N. Ishihara: “Magnetic Field Effect on Heterogeneous ZnO Photocatalysis”, The International Symposium on Photocatalysis, Kyoto, 19-20 July 2012
  60. Daisuke Shiba, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara:”Influence of Ionic Liquids on Ball Milling Process”,PM2012, Yokohama, Japan, 14-18 October, 2012
  61. Eiji Yamasue, Keiichiro Morotomi, Shinsuke Murakami, Hideyuki Okumura and Keiichi N. Ishihara: “Novel Evaluation Method of Resource Dependency on Foreign Countries of Material and Product in terms of Total Materials Requirement “, MFA2012, Conaccount Section, Darmstadt, Germany, 26-28 September 2012
  62. Eiji Yamasue, Shinsuke Murakami, Yoshihisa Sugimura, Takahiro Ukai and Ryota Ohshiro: “Evaluation of Recycling of Small Home Appliances in Japan on TMR Reduction”, MFA2012, Conaccount Section, Darmstadt, Germany, 26-28 September 2012
  63. Eiji Yamasue, Kazuyo Matsubae, Kenichi Nakaima and Ichiro Daigo: “Activity of Material Flow Analyses in Japan Considering Recycling Processes”, International Cooperation Symposium TOSHIKOHZAN “Urban Mine” – Its Potential Resources, Kyoto TERRSA , 1-2 October 2012 (Invited & panelist)
  64. Eiji Yamasue, Keiichiro Morotomi, Shinsuke Murakami, Hideyuki Okumura and Keiichi N. Ishihara: “Integrated Indicator for Resource Dependency by TMR”, Ecobalance 2012, Yokohama, Japan, 20-22, November 2012
  65. Eiji Yamasue, Kazuyo Matsubae, Kenichi Nakajima, Tetsuya Nagasaka: “Potential of Steelmaking Slag as New Phosphorous Resource in terms of Total Materials Requirement.”, TMS2013 SYMPOSIUM: REWAS 2013: Enabling Materials Resource Sustainability, San Antonio, Texas, USA, 3-7 March 2013.
  66. Eiji Yamasue, Takashi Fujimori and Keiichi N Ishihara: “Recyclability of Substance considering Landfilling Total Material Requirement (LF-TMR)”, International Conference on Final Sinks 2013, Espoo, Finland, 16-18 May 2013.
  67. Eiji Yamasue: “Potential of Steelmaking Slag as New Phosphorus Resource”, Technical University of Denmark, 22 May 2013 (Invited speech)
  68. Eiji Yamasue: “Properties and traditional uses of Tatara-steel”, International seminar on Art and Technology of Pre-modern Ironmaking and Blacksmithing in Japan and Finland (Invited speech)
  69. Shinsuke Murakami, Eiji Yamasue, Hiroshi Otsuka, Chiharu Tokoro and Jiro Yamatomi: “Material Flows at Mine site throughout its life and intertemporal allocation of their responsibility”, 7th International Conference of the International Society for Industrial Ecology, to be held at the University of Ulsan, Korea from June 25 to 28, 2013.
  70. Kenichi NAKAJIMA, Keisuke NANSAI, Kazuyo MATSUBAE, Eiji Yamasue, Yasushi KONDO: “Global flow of metals and phosphorus: Supply chain analysis towards to resource logistics”, 7th International Conference of the International Society for Industrial Ecology, to be held at the University of Ulsan, Korea from June 25 to 28, 2013.
  71. Eiji Yamasue, Kazuhiro Nagata and Tadahiro Inazumi: “Metallurgical Evaluation of Traditional Steelmaking in Finland”, The eighth International Conference on the Beginnings of the Use of Metals and Alloys (BUMA8), Nara, Japan, 10-14 Sept 2013.
  72. Manako Tanaka, Kazuhiro Nagata, Masaaki Miyasako, Eiji Yamasue and Masayoshi Ito: “Influence of geological features on chemical composition of Japanese iron sand”, The eighth International Conference on the Beginnings of the Use of Metals and Alloys (BUMA8), Nara, Japan, 10-14 Sept 2013.
  73. Eiji Yamasue, Shinsuke Murakami, Ichiro Daigo, Kenichi Nakajima, Kazuyo Matsubae and Keiichi N Ishihara: “Evaluation of environmental conscious materials in terms of TMR”, Ecomaterials Conference & Exhibition 2013 (ICEM11), Hanoi University of Science and Technology, Vietnam, 11-14 Sep. 2013
  74. Jorge Gómez-Paredes, Eiji Yamasue, Hideyuki Okumura, Keiichi N. Ishihara: “Energy Efficiency to Reduce Poverty and Emissions: A Silver Bullet or Wishful Thinking? Analysis of Efficient Lighting CDM Projects in India”, Procedia Environmental Sciences, Vol.17 (2013), pp.547-556
  75. Eiji Yamasue and Kazuhiro Nagata: “Comparison of Finnish, Ethiopian and Japanese Ancient Ironmaking”, ISIJ Meeting, Tokyo, Japan, 21-23 March 2014
  76. Ichiro Daigo, Kenichi Nakajima, Masaaki Fuse, Eiji Yamasue, Koichi Yagi: “Sustainable Materials Management on the basis of Relationship between Materials’ properties and Human Needs”, 8th International Conference on Society & Materials, SAM8, Liège, 20-21 May 2014
  77. S. Endo, Eiji Yamasue, H.Okumura, K.N. Ishihara: “Temperature dependence of the Magnetic Field Effect on Photocatalytic Reaction”, International Conference on Environmental Catalyst, Asheville, North Carolina United States of America, 24-27 August 2014
  78. K. N. Ishihara, D. Shiba, Eiji Yamasue and H. Okumura: “A role of process control agent for mechanical milling”, The 15th International Conference on Rapidly Quenched & Metastable Materials, Shanghai, China, 24-28 August, 2014
  79. D. Shiba, Eiji Yamasue and H. Okumura and K. N. Ishihara: “Mechanical Milling of TiO2 and ZnO with Organic Solvents”, The 15th International Conference on Rapidly Quenched & Metastable Materials, Shanghai, China, 24-28 August, 2014
  80. Elizabeth Webeck, Kazuyo Matsubae1, Kenichi Nakajima, Keisuke Nansai, Eiji Yamasue, Tetsuya Nagasaka: “Potential and bottleneck for recovery and recycling of P in steelmaking slag Focusing China, India and Japan”, Sustainable Phosphorus Summit 2014, Le Corum, Montpellier, France, 1-3 September 2014
  81. Tran Duc Huy and Eiji Yamasue: “Circulation of scrap steel in Vietnam and its Quality”, INTERNATIONAL FORUM ON GREEN TECHNOLOGY AND MANAGEMENT (IFGTM) – 2014, Can Tho City, Vietnam, 25-26 September 2014
  82. Eiji Yamasue, K. Matsubae and K. N. Ishihara: “Total Material Requirement of Food Production and Related Materials in Japan”, 11th International Conference on EcoBalance, Tsukuba, Japan, from 27 to 30 October 2014.
  83. Eiji Yamasue, Kazuyo Matsubae, Kenichi Nakajima, Ichiro Daigo, Shinsuke Murakami and Keiichi N Ishihara: “How should we recycle scrap steel from End-of-Life vehicle in terms of TMR?”, The joint 11th International Society for Industrial Ecology (ISIE) Socio-Economic Metabolism section conference and the 4th ISIE Asia-Pacific conference, Melbourne, Australia, 17-19 November 2014
  84. Eiji Yamasue, Kenichi Nakajima, Shinsuke Murakami, Kazuyo Matsubae and Keiichi N Ishihara: “TMR of Material Production and Recycling for Bottom-up Decoupling”, The joint 11th International Society for Industrial Ecology (ISIE) Socio-Economic Metabolism section conference and the 4th ISIE Asia-Pacific conference, Melbourne, Australia, 17-19 November 2014

Domestic conference (showing only invited or awarded ones / 139 presentations)
国内会議発表（139件のうち受賞および招待講演のみ抜粋）

  1. 山末英嗣：「リサイクルのTMR（都市鉱石TMR）によるスクラップのリサイクル性評価」，第6回マテリアルリスク指標研究会，環境材料設計基準に資するマテリアルリスク指標の作成，日本橋ビジネスセンター，2010年5月19日（招待講演）
  2. 山末英嗣：「関与物質総量を用いた都市鉱山の「質」に関する新規評価手法」，廃棄物循環資源学会研究部会合同講演会，日本大学理工学部駿河台校舎1号館６階CSTﾎｰﾙ，2010年7月9日（招待講演）
  3. 中村慎一郎，山末英嗣：「産業エコロジーから見た廃棄物と再資源化」，第4回先進オリエントサイクル研究開発セミナー，“先進原子力科学が拓く新資源戦略と課題”，六ヶ所村スワニーホール，2010年7月30日（招待講演）
  4. 前新将，谷川寛樹，山末英嗣：「GISにTMR指標を重畳した建設ストックのリサイクル性評価手法」，環境情報科学センター第24回環境研究発表会，2010年11月24日（最優秀ポスター賞）
  5. 南埜良太, 山末英嗣, 中島謙一, 村上進亮, 奥村英之, 石原慶一：「ノートパソコンおよび携帯電話からの金属およびプラスチックリサイクルに必要なTMR(都市鉱石TMR)の算出と評価」，日本LCA学会春季大会，仙台，東北大学，2011年3月3-5日（日本LCA学会論文賞受賞講演）
  6. 幸浩子，山末英嗣，奥村英之，石原慶一：「小学校6年生の放射線に対する考えの変化；授業前後・地域性の関連分析」　日本土木学会　環境工学研究フォーラム　2012/11/28-30　（優秀ポスター発表賞）
  7. 山末英嗣：資源端重量の観点から見た資源リスク評価, 龍谷エコロジーセミナー：「工学系と生態系の架け橋：資源利用と生物多様性」、2013年6月5日、龍谷大学、京都（招待講演）
  8. 山末英嗣：「リン資源としての鉄鋼スラグ利用」，日本鉄鋼協会第29回歴史を変える転換技術研究会「製鋼スラグの利用に伴う製鉄プロセスの技術改革の歴史と今後の革新的発展」，2014年2月24日（招待講演）
  9. Eiji Yamasue and Kazuhiro Nagata: “Comparison of Finnish, Ethiopian and Japanese Ancient Ironmaking”, ISIJ Meeting, Tokyo, Japan, 21-23 March 2014（招待講演）

Book or Book chapter （著書）

  1. Kosuke O. Hara, Eiji Yamasue, Hideyuki Okumura and Keiichi N. Ishihara: “Indicators for Evaluating Phase Stability During Mechanical Milling (Chapter 33)”, Zero-Carbon Energy Kyoto 2009, edited by Takeshi Yao, DOI 10.1007/978-4-431-99779-5_33, © Springer 2010, pp.211-215
  2. 山末英嗣，石原慶一：「循環型社会が目指す物（第二章）」，エネルギー・環境・社会―現代技術社会論 (京大人気講義シリーズ)，丸善，2010年, pp.104-117
  3. 山末英嗣，奥村英之，石原慶一：「金属酸化物による二酸化炭素の分解技術」，二酸化炭素の有効利用技術の分担執筆，2010年
  4. Supawan Joonwichien, Eiji Yamasue, Hideyuki Okumura, and Keiichi N. Ishihara: “Utilization of Magnetic Field for Photocatalytic Decomposition of Organic Dye with ZnO Powders”, Zero-Carbon Energy Kyoto 2010, © Springer 2010, pp.171-176
  5. Jordi Cravioto, Eiji Yamasue, Hideki Okumura and Keiichi N Ishihara: “Performance analysis between well-being, energy and environmental indicators using Data Envelopment Analysis”, Zero-Carbon Energy Kyoto 2010, © Springer 2010, pp.49-55
  6. Nguyen The Luong, Eiji Yamasue, Hideyuki Okumura, and Keiichi N. Ishihara, Thermal Stability and Catalytic Performance of Pd, Pt and Rh Loaded on CuO–CeO2–Al2O3 Support for Three-Way Catalysts, In Takeshi Yao (editor) Zero-Carbon Energy Kyoto 2012, Green Energy and Technology, DOI 10.1007/978-4-431-54264-3_19.
  7. Hoang-Long Le, Eiji Yamasue, Hideyuki Okumura, and Keiichi N. Ishihara, Analysis of Intentions to Recycle Electronic Waste (e-waste) Using the Theory of Planned Behavior: A Case Study in Urban Areas of Vietnam, In Takeshi Yao (editor) Zero-Carbon Energy Kyoto 2012, Green Energy and Technology
  8. 山末英嗣：「最新 マイクロ波エネルギーと応用技術（第6章2節2.3 環境エネルギー獲得分野における世界的動向）」，（株）産業技術サービスセンター，東京，2014年（予定）

Review paper （総説・解説）

  1. 石原慶一，山末英嗣，醍醐市朗：「資源生産性指標から見た再資源化」，電気学会メタボリズム社会・環境システム研究会論文集，MES-04-12，(2004), 21-24
  2. 山末英嗣，奥村英之，石原慶一：「都市鉱山としての家電製品ストック～ストック型社会構築に向けて～」，電気学会論文誌C，128巻, 1号，(2008) pp.6-10
  3. 山末英嗣，南埜良太，奥村英之，石原慶一：「関与物質総量(TMR)を用いた使用済み製品に含まれる元素・素材のリサイクル性評価」，軽金属，第59巻，第11号，(2009), pp.620-628
  4. 山末英嗣，南埜良太，奥村英之，石原慶一：「都市鉱山に含まれる元素・素材の「質」の関与物質総量の観点から見た評価」，日本LCA学会誌第6巻，2号，(2010) , pp.111-118
  5. 山末英嗣，南埜良太，奥村英之，石原慶一：「都市鉱山に含まれる素材の品位評価～リサイクルの関与物質総量（資源端重量）～」，廃棄物資源循環学会誌，第21巻，1号，(2011), pp.11-18
  6. 山末英嗣：「都市鉱山リサイクルの資源端重量」，金属，Vol.82, No.2, (2012), pp.115-121
  7. 山末英嗣，橋本征二：「都市鉱山の有効利用と資源端重量」，金属，Vol.82, No.7, (2012), pp.585-588
  8. 山末英嗣：「関与物質総量を用いた都市鉱山の評価」，検査技術，Vol.11, (2012), pp.57-64
  9. 松八重一代，久保裕也，山末英嗣，長坂徹也：「製鋼スラグからのリン資源回収の可能性」，環境技術，Vol.43, No.2 (2014), pp.15-21
  10. 山末英嗣，中島謙一，橋本征二：「都市鉱山の有効利用のための方法論」，金属，82号，第7巻，(2012)，特集号

Patent （特許）

  1. 山末英嗣，中奥洋，石原慶一： 炭酸ガスの固定化方法，特願2003-383318，平成15年11月13日
  2. 石原慶一，奥村英之，山末英嗣，入江耕平，諸富芳徳：窒素吸蔵合金の製造方法，特願2004-336901，平成16年11月22日
  3. 奥村英之，石原慶一，山末英嗣，榎本洋祐：環境負荷物質の除去触媒およびその製造方法，特願2004-339689，出願日：平成16年11月24日
  4. 平井千恵，上門一登，湯淺明子，野末章浩，石原慶一，奥村英之，山末英嗣：気体吸着合金，特願2005-007298，出願日：平成17年1月14日
  5. 平井千恵，上門一登，湯淺明子，野末章浩，奥村英之，石原慶一，山末英嗣：気体吸着性物質，気体吸着合金および気体吸着材，特許協力条約に基づく国際出願，国際出願番号：PCT/JP2006/300330, 2006年1月13日
  6. 平井千恵，上門一登，湯淺明子，野末章浩，奥村英之，石原慶一，山末英嗣 ：気体吸着性物質，気体吸着合金および気体吸着材，中国出願：出願番号：107830, 2006年1月11日
  7. 奥村英之，石原慶一，山末英嗣，榎本洋祐, “ホルムアルデヒドの除去触媒およびその製造方法”, 特許弟4538635号、登録日2010年7月2日
    .

Award （受賞）

  1. 東京工業大学手島精一記念研究賞，2001年3月，（博士論文に対して）
  2. 社団法人日本金属学会第12回若手講演論文賞，2010年3月, (Eiji Yamasue, Ryota Minamino, Ichiro Daigo, Hideyuki Okumura and Keiichi N. Ishihara：”Evaluation of Total Materials Requirement for the Recycling of Elements and Materials (Urban Ore TMR) from End-of-Life Electric Home Appliances”, Materials Transactions，vol.50, No.9, (2009), 2165-2172)
  3. 環境情報科学センター第24回環境研究発表会最優秀ポスター賞，（前新将，谷川寛樹，山末英嗣：「GISにTMR指標を重畳した建設ストックのリサイクル性評価手法」，環境情報科学センター第24回環境研究発表会，2010年11月24日）
  4. 土木学会環境システム研究会 優秀論文賞，谷川寛樹，山末英嗣，稲津亮，前新将：「4d-GISを用いた都市重量の変化と建設資材のリサイクル性に関する検討」，土木学会環境システム研究論文集，vol.38, No.9, (2010), pp.413-419
  5. 日本LCA学会第2回学会賞受賞（論文賞）（南埜良太，山末英嗣，中島謙一，村上進亮，奥村英之，石原慶一：「ノートパソコンおよび携帯電話からの金属およびプラスチックリサイクルに必要なTMR(都市鉱石TMR)の算出と評価，Evaluation of Total Materials Requirement for the Recycling of Elements (Urban Ore TMR) from Laptop PC and Mobile Phone」，日本LCA学会誌，第6巻，3号，(2010), pp.251-258）
  6. Eco Japan Cup ポリシー部門　環境ニューディール政策提言「サステナビリティ優秀提言」 中島謙一，有沢俊一，山末英嗣，原田幸明：災害廃棄物のリサイクルによる地域経済の復興・活性化、そして創生に向けた提言～災害廃棄物選別所－リサイクル屋台村の創設～ 2012年1月
  7. 日本土木学会　環境工学研究フォーラム　2012/11/28-30　優秀ポスター発表賞　「小学校6年生の放射線に対する考えの変化；授業前後・地域性の関連分析」　幸浩子，山末英嗣，奥村英之，石原慶一
  8. 山末英嗣：西山記念賞，鉄鋼協会 2015/3/18

研究関連資格

  1. 第二種放射線取扱主任者
  2.  Ｘ線作業主任者
  3. 特定化学物質等作業主任者
  4. 第一種衛生管理者