学術論文
- K.N.Ishihara and P.H.Shingu " Estimation of T0 curve for
theAg-CuSystem in Connection with the Rapid Solidification", Scripta Metallurgica,
Vol.16, pp.837-838 (1982).
- A.J.Mackintosh, K.N.Ishihara and P.H.Shingu "Thermal Analysis of the
RapidQuenchingProcess in Gallium", Scripta Metallurgica, Vol.17, pp.1441-1442
(1983).
- K.N.Ishihara and P.H.Shingu "The Limitation of Solid Solubility Extention
by Rapid Quenching", Journal of Material Science Letters, Vol.3, pp.1015-1016
(1984).
- K.N.Ishihara and P.H.Shingu "Calculation of T0 Curves and
MetastablePhaseEquilibria in Connection with Rapid Solidification", Material
ScienceandEngineering, Vol.63, pp.251-256 (1984).
- K.N.Ishihara, S.R.Nishitani, H.Miyake and P.H.Shingu "Rapid Solidification
and the Metastable Phase Diagrams of the Fe-C, Co-C and Ni-C Systems",International
Journal of Rapid Solidification, Vol.1, pp.51-58 (1984).
- S.R.Nishitani, K.N.Ishihara, R.O.Suzuki and P.H.Shingu "Metastable
SolidSolubilityLimit of Carbon in the Ni-C System", Journal of Material ScienceLetters,
Vol.5, pp.872-875 (1985).
- K.N.Ishihara, M.Maeda and P.H.Shingu "The Nucleation of Metastble
Phases from Undercooled Liquids", Acta Metallurgica, Vol.33, pp.2113-2117
(1985).
- K.N.Ishihara, K.Mori and P.H.Shingu "Formation of a High Pressure
Phase in In-Bi Alloys Solidified from Highly Undercooled Liquid at AtmosphericPressure",
Proceedings of 5th International Conference on Rapid QuenchedMetals, Wurtzburg,
West Germany, S.Steebs and H.Warlimont eds., ElsevierScience Publishers,pp.55-58
(1985).
- P.H.Shingu, A.Shimohigashi and K.N.Ishihara "Undercooling of Liquid
MetalsbyRapid Quenching", Proceedings of 5th International Conference on
RapidQuenchedMetals, Wurtzburg, West Germany, S.Steebs and H.Warlimont eds.,
ElsevierScience Publishers, pp.35-38 (1985).
- K.Mori, K.N.Ishihara and P.H.Shingu "Metastable Phase Diagram of the
Pb-SnSystem",Materials Science and Engineering, Vol.78, pp.157-162 (1986).
- K.N.Ishihara and P.H.Shingu "Calculation of Structure Factor for Three-Dimensional
Penrose Tiling", Journal of the Physical Society of Japan, Vol.55, pp.1795-1798 (1986).
- K.N.Ihshihara, H.Gohchi and P.H.Shingu "A Metastable Eutectic Reaction
in the Au-Sn System", Hume-Rothery Memorial Symposium, New Orleans, E.W.Collings
and C.C.Koch eds., Metallurgical Society, pp.49-57 (1986).
- K.N.Ishihara, M.Maeda, K.Mori and P.H.Shingu "Metastable Phase Diagram
of the Sn-Bi System", International Journal of Rapid Solidification, Vol.3,
pp.11-22 (1987).
- S.R.Nishitani, Y.Iwasa, K.N.Ishihara and P.H.Shingu "Formation of
Al-Cr Quasicrystal Films by RF-Sputtering", Transaction of Japan Institute
Metals,Vol.28, pp.679-681 (1987).
- K.N.Ishihara "Periodic and Aperiodic Lattices" Material Science Forum,
Vols.22-24, pp.223-230 (1987).
- S.R.Nishitani, K.N.Ishihara, K.F.Kobayashi and P.H.Shingu "Growth
of Quasicrystals",MaterialsScience and Engineering, Vol.99, pp.443-447 (1988).
- K.N.Ishihara and A.Yamamoto "Penrose Pattern and Related Structures
I.Superstructureand Generalized Penrose Patterns", Acta Crystallographica,
Vol.44,pp.508-516(1988).
- A.Yamamoto and K.N.Ishihara "Penrose Pattern and Related Structures
II.DecagonalQuasicrystals", Acta Crystallographica, Vol.44, pp.707-714 (1988).
- K.N.Ishihara, P.H.Shingu, H.Matsueda and Y.Furuhata "Non-equilibrium
SolidSolutionFormation of (III-V)-IV Semiconductors", Supplement to Trans.
JIM, Vol.29,pp.249-252 (1988).
- S.R.Nishiatani, S.Yagi, K.N.Ishihara, K.F.Kobayashi and P.H.Shingu
"ProcessingofIcosahedral Phases", Supplement to Trans. JIM, Vol.29, pp.525-528
(1988).
- P.H.Shingu, B.Huang, J.Kuyama, K.N.Ishihara and S.Nasu "Amorphous
and Nano-meterOrderGrained Structure of Al-Fe and Ag-Fe Alloys Formed by
Mechanical Alloying",Proc. DGM Conference "New Materials by Mechanical Alloying
Techniques", Calw-Hirsau (FRG), Oct.,pp.319-326 (1988)
- N.Inoue, K.N.Ishihara and P.H.Shingu "Non-EquilibriumPhases of Al-Ti
AlloysFormedby Mechanical Alloying and RF-Sputtering", Proc. 1st Japan International
SAMPE Symposium, Nov.-Dec., pp.13-18 (1989)
- N.K.Mukhopadhyay, K.N.Ishihara, S.Ranganatan and K.Chattopadhyay "Rational
Approximant Structures and Phaseon Strain in Icosahedral Quasicrystalline
Phases" Acta Metall. Mater. Vol.39, pp.1151-1159, (1991).
- P.H.Shingu, K.N.Ishihara, K.Uenishi, J.Kuyama, B.Huang and S.Nasu
"Metastable Alloy Phase Formation by Repeated Rolling in Some Common Metallic
BinaryAlloy Systems" the TMS Symposium on 'Solid State Powder Processing'
Oct.2-5,tobe published from TMS, (1989).
- P.H.Shingu, K.N.Ishihara, K.Uenishi, J.Kuyama, B.Huang and S.Nasu
quot;Metastable Alloy Formation by Repeated Rolling in Some Common Metallic
Binary AlloySystem quot; Solid State Powder Processing The Minerals, Metals
& MaterialsSociety, pp.21-34, (1990).
- B.Huang,N.Tokizane,K.N.Ishihara,P.H.Shingu,and S.Nasu "Amorphization
ofAl-FeAlloys Formed by Ball Milling and Repeated Rolling"Journal of Non-Crystalline
Solids 117/118, pp.688-691, (1990).
- S.Nasu, P.H.Shingu, K.N.Ishihara and F.E.Fujita "Mossbauer Study on
MixingandKneading of Metallic Powders" Hyperfine Interactions Vol.55, pp.1043-1050
(1990).
- P.H.Shingu, K.N.Ishihara, F.Ghonome, T.Hayakawa, M.Abe and T.taguchi
"SolidStateSynthesis of TiAl by Use of Pseudo HIP" to be published in the
proceedingofthe First US-Japanese orkshop on Combustion Synthesis, Jan. (1990).
- 田中武雄、那須三郎、今岡進、石原慶一、新宮秀夫 「高炭素Fe-C合金のメカニカルアロイング」、粉体及び粉末冶金、第37巻、pp.660-664,
(1990).
- 新宮秀夫、石原慶一 「内熱型(Pseudo)-HIP法の利用による 金属間化合物の反応合成とnear-net-shape成形」、粉体及び
粉末冶金、第37巻、pp.670-673, (1990).
- H.Wada, M.Hada, K.N.Ishihara, M.Shiga and Y.Nakamura "Low Temperature
SpecificHeatof Nearly and Weakly Ferromagnetic Y(Co1-xAl
x)2"Journalof the Physical Society of Japan, Vol.59, pp.2956-
2962 (1990).
- J.Kuyama, H.Inui, S.Imaoka, S.Nasu, K.N.Ishihara and P.H.Shingu "Nanometer-Sized
Crystals Fomed by the Mechanical Alloying in the Ag-Fe System" Japan Journal
of Applied Physics Letters, Vol.30, pp.L854-L856 (1991).
- T.Tanaka, S.Nasu, K.N.Ishihara and P.H.Shingu "Mechanical Alloying
of theHighCarbon Fe-C System" Journal of the Less-Common Metals, Vol.171,
pp.237-247(1991).
- F.Li, Y.Iwasa, K.N.Ishihara, P.H.Shungu and S.Nasu "Mechanical Alloying
of Al, Cu and Transition Metals (Ti, V, Cr, Mn, Fe, Co and Ni) and Mechanical
Grinding of AlCuFe Quasicrystal" Proc. of China-Japan Seminars on Quasicrystals,
pp.31-38 (1991), World Scientific Publishingi, Farrer Road, Singapore.
- K.Uenishi, K.F.Kobayashi, K.N.Ishihara and P.H.Shingu "Formation of
a Super-saturatedSolidSolution in the Ag-Cu System by Mechanical Alloying"
Mater. Sci.Eng. Vol.A134, pp.1342-5, (1991).
- 田中武雄、那須三郎、今岡進、石原慶一、新宮秀夫 「Fe-C系合金のメカニカルアロイングによる準安定炭化物とアモルファス相の形成」、粉体および粉末冶金、第38巻、pp.95-98,
(1991).
- 深水秀範、新宮秀夫、 石原慶一「内熱型Pseudo-HIP法における圧力分布と反応合成したTiAl化合物の引張り強度」、粉体及び粉末冶金、第38巻、pp.99-102,
(1991).
- P.H.Shingu, K.N.Ishihara and J.Kuyama "Non-Equilibrium Alloy Phase
ProducedbyMechanical Alloying" Proc. 34th Japan Congress on Material Research,
pp.19-28,TheSociety of Materals Science, Kyoto Japan,(1991).
- P.H.Shingu, K.N.Ishihara and S.Umeda "A Seudo-HIP Process Applied
to theReactionSynthesis of Intermetallic Compounds" Proc. 6th Int. Conf.
on MechanicalBehaviour of Materials, Vol.3., pp.217-222, The Society of Materals
Science,Kyoto Japan,(1991).
- 久山純司、石原慶一、新宮秀夫 「Fe-Mo系のメカニカルアロイング」、粉体及び粉末冶金、第38巻、pp.910-3,(1991).
- Feng Li, K.N.Ishihara and P.H.Shingu "The Formation of Metastable
Phases by Mechanical Alloying in the Aluminum and Copper System" MeatallurgicalTrans
A, Vol. 22A, pp.2849-54, (1991).
- H.Okumura, K.N.Ishihara, P.H.Shingu, H.S.Park and S.Nasu "Mechanical
AlloyingofFe-B Alloys" J. Mater. Sci. Vol.27, pp.153-160, (1992).
- S.Nasu, S.Morimoto, H.Tanimoto, B.Huang, T.Takeo, J.Kuyama, K.N.Ishihara
and P.H.Shingu "Mossbauer Study of Mechancally Alloyed Powders" Hyper.Inter.,
Vol.67, pp.681-5, (1991).
- K.Miyazaki and K.N.Ishihara "Introduction to Four-Dimensional Graphics"
Forma Vol.6, pp.85-97, (1991).
- J.Kuyama, K.N.Ishihara and P.H.Shingu "Nano-meter Ordered Grain Structure
Formation bu Mechanical Alloying" Materials Science Forum, Vols. 88-90,pp.521-528,
(1992).
- S.Nasu, S.Imaoka, S.Morimoto, H.Tanimoto, B.Huang, T.Tanaka, J.Kuyama,
K.N.Ishihara and P.H.Shingu "Mossbauer Study of Mechanically Alloyed Powders"
Materials Science Forum, Vols. 88-90, pp.569-576, (1992).
- K.Uenishi, K.F.Kobayashi, S.Nasu, H.Hatano, K.N.Ishihara and P.H.Shingu
"Mechanical Alloying in the Fe-Cu System" Z. Metallkd. Vol.83, pp.132-135,
(1992).
- T.Tanaka, K.N.Ishihara and P.H.Shingu "Formation of Metastable Phases
ofNi-Cand Co-C System by Mechanical Alloying" Metall. Trans. A Vol.23A,pp.2431-5,
(1992).
- S.Nasu, M.Miglierini, K.N.Ishihara and P.H.Shingu "Transformation
form Icosahederal Quasicrystalline to Amorphous Structure in Al65
Cu 20Fe15" J. Phys. Soc. Japan, Vol.61, pp.3766-3772,(1992).
- 田中武雄、那須三郎、石原慶一、新宮秀夫 「Fe-C-Si系合金のメカニカルアロイングによるFeSi,FeSi2
および SiCの形成」、粉体および粉末冶金、第39巻、pp.865-869,(1992).
- T.Tanaka(a),S.Nasu,K.Nakagawa(b),K.N.Ishihara and P.H.Shingu(c),"Mechanical
Alloying of Fe-C and Fe-C-Si Systems",Materials Science Forum Vols.88-90,pp.269-274,(1992).
- K.Uenishi,K.F.Kobayashi(a),K.N.Ishihara and P.H.Shingu(b),"Formation
of(Al,In)-SbAlloys by Mechanical Alloying",Materials Science Forum Vols.88-90,pp.453-458,(1992).
- K.Uenishi,K.F.Kobayashi(a),K.N.Ishihara and P.H.Shingu(b),"Non-Equilibrium
Phase Formation in Fe-Ag-Cu System by Mechanical Alloying",Materials Science
Forum Vols.88-90,pp.459-466,(1992)
- P.H.Shingu, and K.N.Ishihara "Processing Principles in Rapid Solidification
" Rapidly Solidified Alloys, Marcel Dekker, Inc., pp.103-118, (1993)
- P.H.Shingu, and K.N.Ishihara "Metastable Melting Phenomena and Solid
StateAmorphization(SSA) by Mechanical Alloying" journal of Alloys and Compounds,
Vol.194,pp.319-324, (1993)
- 田中武雄、那須三郎、石原慶一、新宮秀夫 「鋳鉄粉末のメカニカルアロイング」、鋳物、第65巻、pp.19-24,(1993).
- 田中武雄、那須三郎、石原慶一、新宮秀夫 「メカニカルアロイングによるFe3Cの生成過程」、鋳物、第65巻、pp.25-30,
(1993).
- P.H.Shingu, K.N..Ishihara and A.Kondo "Alloy Formation by Repeated
CompressiveDeformation"Proc. the 2nd Int. Conf. on Structual Applications
of MechanicalAlloying,Vancouver, Canada, pp.41-44, (1993).
- 田頭憲、石原慶一、新宮秀夫 「Electro Discharge Compaction法によるMechanicalGrindingした純鉄粉の固化成形」、
粉体および粉末冶金、第40巻、 pp.967-970(1993).
- P.H.Shingu, K.N.Ishihara, N.Yamamoto and K.Yasuna "Nano-Structure
Formation by Repeated Compressive Plastic Deformation" Ann. Chim. Fr. Vol.18,
pp.387-394 (1993).
- K.N.Ishihara, S.Diaz de la Torre, T.Hosoe, A.Yamamoto and P.H.Shingu
"ThermodynamicsofPhase Transition by Mechanical Alloying" 1st International
ConferenceonProcessing Matereials for Properties, eds H.Hennen and T.Oki,
1993 Hawaii,pp.667-670.
- Takeo Tanaka,Saburo Nasu,Bin Huang,Keiichi N.Ishihara and Paul Hideo
Shingu,"MoessbauerSpectroscopyof Nanocrystalline Pure Iron Prepared by Mechanical
Milling",NuclearInstrumentsand Methods in Physics Research B76,195-196,(1993).
- P.H.Shingu,K.N.Ishihara,N.Yamamoto and I.Yamada,"Atomic Scale Laminated
Alloy Structures Produced by Repeated Pressing",Proceedings of 1993 Powder
Metallurgy World congress,pp.86-89,(1993).
- 嶋吉耕史、石原慶一、新宮秀夫 「EDC (Electric-Discharge Compaction) 法による金属間化合物の固化成形」、粉体および粉末冶金、第41巻、pp.877-880
(1994).
- 石原慶一、ラデンカ・マリチ、近藤暁裕、新宮秀夫 「メカニカルアロイングにおける異相界面反応」、粉体粉末冶金、第41巻、pp.949-952
(1994).
- S.D.De la Torre, A.yamamoto, K.N.Ishihara "Metastable Phase Formation
andActivityEstimation of the Ag-Cu System Prepared by Mechanical Alloying"
MaterialsScience Forum, January 20, pp.237-242, (1995).
- 田口功平、綾田倫彦、石原慶一、新宮秀夫 「Pseudo-HIP反応焼結における緻密化過程とTiAlバブルスプリングリテーナーの試作」粉体粉末冶金、第42巻、pp.511-516
(1995).
- T.Tanaka, M.Motoyama, K.N.Ishihara and P.H.Shingu "Characterization
ofCarbonin Mechanically Alloyed C-10at%Fe Powder"Materlial Transaction,JIM,
Vol.36,pp.276-281 (1995).
- P.H.Shingu and K.N.Ishihara "Non-equilibrium Materials by Mechanical
Alloying"MaterlialTransaction, JIM, Vol.36, pp.96-101 (1995).
- K.Niwase, T.Tanaka, Y.Kakimoto, K.N.Ishihara and P.H.Shingu "Raman
SpectraofGraphite and Diamond Mechanically Milled with Agate or Stain less
SteelBall-Mill"Materlial Transaction, JIM, Vol.36, pp.282-288 (1995).
- K.Taguchi, M.Ayata, K.N.Ishihara and P.H.Shingu "Near-Net Shape Processing
of TiAl Intermetallic Compounds Via Pseudo HIP-SHS Route" Intermetallic,Vol.3,
pp.91-98 (1995).
- R.Maric,K.N.Ishihara and P.H.Shimgu"Structure Formation and Deformation
Behaviour of Multilayer Composite Prepared by Ball Milling and Repeatedpressing"Materials
Science Forum Vols.179-181,pp.801-806,(1995).
- K.N.Ishihara,T.Matsumoto,A.Otsuki and P.H.Shingu"Generation of Chaotic
Structure by the Repetition of Cold Working" ,Solid State Phenomena Vols.42-43,pp.77-86,(1995).
- P.H.Shingu,K.N.Ishihara and A.Otsuki "Mechanical Alloying and Chaos"
MaterialsScienceForum Vols.179-181 ,pp.5-10,(1995).
- P.H.Shingu,K.N.Ishihara and A.Otsuki"Optional Artificial Lattice Produced
by Mechanical Alloying",Materials Science Forum Vols.179-181,pp.383-388,(1995).
- R.Maric, K.N.Ishihara and P.H.Shingu "Structural Changes During Low
EnergyBallMilling in the Al-Ni System" J. Mater. Sci. Lett., Vol.15, pp.1180-3
(1996).
- 田中武雄、吉川浩美、兼吉高広、元山宗之、石原慶一、新宮秀夫「ミリングによる黒鉛の構造変化」、粉体および粉末冶金、第43巻第6号、pp.742-747,(1996).
- S.D.de la Torre,K.N.Ishihara,and P.H.Shingu"Solid Solution Formation
intheAl2O3-Cr2O3 System Assisted
by Ball Milling",Ceramic Transactions,Vol.79,pp.155-162,(1996).
- K.Yasuna,M.Terauchi,A.Otsuki,K.N.Ishihara,and P.H.Shingu "Bulk metallic
Multilayers Produced by Repeated Press-Rolling and Their PerpendicularMagnetoresistance"
,J.Appl.Phys.,Vol.82,No.5,pp.2435-8,(1997).
- P.H.Shingu,K.Yasuda,K.N.Ishihara,A.Otsuki,and M.Terauchi "Nano-scale
MetalMultilayersProduced by Repeated Press-Rolling" Materials Science Forum
Vols.235-238,pp.35-40(1997).
- K.Yasuna,A.Otsuki,K.N.Ishihara,and P.H.Shingu"Study of Magnetoresistance
in Nano-Structured Co-Ag Alloys Produced by Mechanical Alloying" Materials
Science Forum Vols.235-238,pp.825-830,(1997).
- A.Otsuki,P.H.Shingu and K.N.Ishihara "Stored Energy and electromotive-force
of mechancally milled copper " Materials Science Forum, 235-238, 949-53(1997).
- B.Huang, K.N.Ishihara, P.H.Shingu "Metastable phases of Al-Fe system
bymechanicalalloying" Matereials Science and Engineering Vol.A231, pp.72-79,
(1997).
- T.Yamamoto, A.Otsuki, K.N.Ishihara, and P.H.Shingu "Synthesis of near
netshapehigh density TiB/Ti composite" Material Science and Engineering Vol.A239-140,P.647,
(1997).
- Huang Bin, Ishihara, K.N. and Shingu, H.P. "Bulk nano-scale multilayers
prepared by repeated pressing-rolling" Acta Metall. Sin.,vol.34, no.5,455-8,
(1998).
- 橋本勝、大槻徴、石原慶一、新宮秀夫 「金属粉末を繰り返し圧縮・圧延することにより作製したFe/Agナノスケール人工格子の磁気抵抗効果の評価
」粉体および粉末冶金、第45巻、第10号 p.962(1998).
- S.D.De la Torre, K.N.Ishihara, P.H.Shingu, D.Rios-Jara and H.Miyamoto
"MechanochemicalSynthesis of Refined Ag and Zn Composite Powders Starting
from Oxides"Ceramic Transactions, Vol. 94, pp.287-294,(1999).
- S.D.De la Torre, K.N.Ishihara, P.H.Shingu " Synthesis of SnTe by repeated
cold-pressing" Materials Science and Engineering, A266, pp.37-43, (1999)
- P.H.Shingu, K.Yasuna, K.N.Ishihara, A.Otsuki and M.Terauchi "Nano-Scale
Metal Multilayers Produced by Repeated Press-Rolling" Radiation Effectsin
Solids, Vol.148, pp.555-562, (1999).
- P.H.Shingu, k.N.Ishihara, A.Otsuki, M.Hashimoto, N.Hasegawa, I.Daigo
andB.Huang"Nano-Scaled Multilayered Bulk Materials Manufactured by Repeated
Pressingand Rolling in the Ag-Fe and Cu-Fe Systems" Materials ScienceForum,
Vols.312-314,pp.293-298, (1999).
- 伊藤傑、山本武志、大槻徴、石原慶一、新宮秀夫 「鉄製粉末冶金材料におけるアクティブディスアセンブリー志向ののリサイクル技術の開発」粉体および粉末冶金、第7巻、
第4号、pp.364-368(2000)
- K.Yasuna, M.Terauchi, A.Otsuki, K.N.Ishihara, P.H.Shingu " Formation
ofnanoscaleFe/Ag multilayer by repeated press-rolling and its layer thickness
dependenceof mangetoresistance "Material Science and Engineering A285pp.412-417(2000)
- 山崎竹伸、山本武志、石原慶一、新宮秀夫 「SHS-Pseudo-HIP法によるTi-Al-C系複合材料の作製とその評価」Journal
of the Japan Society of Powder and Powder Metallurgy Vol.47、No.8 pp.921-926
(2000)
- 江崎剛、石原慶一、新宮秀夫「繰り返し圧縮、圧延法によるFe-Ag金属人工格子の組織及び機械的特性」粉体および粉末冶金、第48巻、第4号pp357-362(2001)
- 酒井永典、石原慶一、新宮秀夫「繰り返し圧縮圧延法による金属多層体の熱電能」粉体および粉末冶金、第48巻、第4号、pp363-367(2001)
- P.H.Shingu,K.N.Ishihara,A.Otsuki,I.Daigo "Nano-scaled multi-layerd
bulkmaterialsmanufactured by repeated pressing and rolling in the Cu-Fe system"Materials
Science and Engineering A301-306, pp399-402 (2001)
- Yuichiro Watanabe,Keiichi N.Ishihara,P.Hideo Shingu "STRENGTH OF NANO-THICKNESS
MULTI-LAYERED Fe-Cu COMPOSITES PRODUCED BY REPEATED PRESSING AND ROLLING"Scripta
MATERIALIA 44 pp1853-1857 (2001)
- 松岡由記、角本昌彦、石原慶一、新宮秀夫 「 凝固偏析による塩水の淡水化」日本金属学会、第65巻、第9号pp.791-794(2001)
- P.Bhattacharya,S.Bysakh,K.N.Ishihara and K.Chattopadhyay "NEW OBSERVATION
ON HEATING Ni-Al MULTILAYERS OF 10nm PERIODICITY"Scripta MATERIALIA 44pp1831-1835
(2001)
- P.Bhattacharya,K.N.Ishihara,K.Chattopadhyay "FeAl multilayers by sputtering:
heat treatment and the phase evolution"Materials Science and EngineeringA304-306,pp250-254(2001)
- 若松貴史、藤原隆博、石原慶一、新宮秀夫「メカニカルアロイングによるブルッカイト型酸化チタンの生成」粉体および粉末冶金、第48巻、第10号pp950-954
(2001)
- 原清信、石原慶一、嵐紀夫、稲葉敦「都市への太陽、未利用エネルギー、コジェネレーション導入時のCO2
削減可能量評価」エネルギー・資源、第22巻、第6号、第130号、pp.475-481 (2001)
- 山本将史,深澤恒典,山末英嗣,石原慶一「自動車の燃料消費率の推移とその要因」,粉体および粉末冶金,第49巻,第5号,(2002), p.419
- Nguyen Thi Anh Tuyet and Keiichi N. Ishihara, “Input-Output Energy Model and Cement Production in Vietnam” Development Engineering, Vol.9, pp.55-67 (2003)
- 石原慶一,山末英嗣,「自己粉砕ねじと家電リサイクルへの応用」,エネルギー資源学会誌,Vol.24, No.3, (2003), pp.184-187
- P. Bhattacharya, K. Chattopadhyay, P. Bellon and K. N. Ishihara, "Phase evolution and microtwins in the Ni-Al multilayers upon annealing and laser mixing", Materials Science and Engineering A,375-377,1277-1284,2004
- 醍醐市朗、若松貴史、山末英嗣、石原慶一,「仮想摩擦係数を用いた旅客輸送における統合的エネルギー効率の評価」"Evaluation of Energy Efficiency in Transportation by the Use of Overall Friction Coefficient",日本エネルギー学会,Vol.84, No.2 (2005), pp.119-125
- 山末英嗣,林宏樹,石原慶一,「小型たたら炉の炉サイズに関する考察」, "Effect of the Size for Small Tatara Steelmaking Furnace",鉄と鋼,vol.91, No.1, (2005), pp.68-74
- 醍醐市朗、石原慶一、松野泰也、足立芳寛「マルコフ連鎖モデルを適用した鉄エレメントのライフサイクルにおける平均使用回数ならびに社会での平均滞留時間の解析手法の構築」,鉄と鋼,vol.91, No.1, (2005), pp.159-166
- F. N. Ishikawa, K. Irie, E. Yamasue, K. N. Ishihara, H. Okumura; "Mechanical alloying and nitrogen storage properties of Ca-Fe powder", Journal of Alloys and Compounds, 395, (2005), pp.159-165
- Victoria Bhattacharya, E. Yamasue, K. N. Ishihara, K. Chattopadhyay : "On the origin and stability of the metastabe phase in rapidly solidified Sn-Bi alloy particles embedded in Al matrix", Acta Materilia, vol.53 No.17, OCT (2005), pp.4593-4603
- Nguyen T. Anh Tuyet and Keiichi N. Ishihara : “Sectoral Energy Consumption in Vietnamese Industry in 1989, 1996 and 2000”, Development Engineering, vol.11, (2005), pp.81-96
- Nguyen Thi Anh Tuyet and Keiichi N. Ishihara:”Analysis of changing hidden energy flow in Vietnam”,Energy Policy,Vol.34 (2006), pp.1883-1888
- 山末英嗣,中島謙一,奥村英之,石原慶一: 「新製品への代替を考慮した家電製品の廃棄台数予測」, "Estimation of the Number of Discarded Home Electric Appliances Considering New Alternative Products", 日本金属学会誌,vol.70, No.8, (2006), pp.611-614
- Sahu, K. K. and Ishihara, K. N.: “Modelling local voids using an irregular polyhedron based on natural neighbourhood and application to characterize near-dense random packing (DRP)”, Philosophical Magazine 86 (36): (2006), pp. 5909-5926
- Sahu, Kisor K., Hazama Y. and Ishihara, Keiichi N.: “Gushing in canned beer: The effect of ultrasonic vibration”, J Colloid and Interface Science 302 (1): (2006), pp.356-362
- T. Yokoi, E. Yamasue, H. Okumura and K. N. Ishihara:"Mechanical Milling of Lithium with Metal Oxide and its Reactivity with Gases", Materials Science Forum Vols. 534-536 (2007) pp.197-200
- Nguyen T. Anh Tuyet and Keiichi N. Ishihara "Energy productivity during the years of Doi Moi", Journal of Applied Input Output Analysis Vol. 11-12. (2007)
- H. Okumura, F.N. Ishikawa, Y. Morotomi, E. Yamasue, K.N. Ishihara: "Mechanical alloying, nitrogen storage and magnetization of Ca-Co powder", Materials Science and Engineering A, vol.449-451 (2007) 1123-1126
- K.N. Ishihara, K. Irie, F. Kubo, E. Yamasue, H. Okumura: "Mechanical milling of Fe-Li and Cu-Li systems and their nitrogen absorption properties", Materials Science and Engineering A, vol.449-451 (2007) 1067-1070
- Eiji Yamasue, Hironori Yamaguchi, Hideyuki Okumura and Keiichi N. Ishihara: "Decomposition of Carbon Dioxide into Carbon using Mechanically milled Magnetite", Journal of Alloys and Compounds, vol.434-435, (2007), pp.803-805
- K. N. Ishihara, F. Kubo, K. Irie, K. Shichi, E. Yamasue and H. Okumura: "Mechanical Alloying of Lithium-base Systems", Journal of Alloys and Compounds, vol.434-435, (2007), pp.542-545
- 早渕百合子、山末英嗣、奥村英之、石原慶一:「エネルギー・環境教育の波及効果の検討」エネルギー環境教育研究 第2巻、第1号、pp.61-67
解説
- 新宮秀夫、石原慶一 「金属の急冷凝固」、鉄と鋼、第69年、pp.1087-1094, (1983).
- 新宮秀夫、鈴木亮輔、石原慶一 「急冷と準安定平衡」、材料、第33巻、pp.239-245,(1984).
- 新宮秀夫、鈴木亮輔、石原慶一 「アモルファス合金の結晶化」、鉄と鋼、第70年、pp.1828-1832,(1984).
- 新宮秀夫、鈴木亮輔、石原慶一 「アモルファスの熱力学」、固体物理、Vol.20,pp.593-601,(1985).
- 石原慶一 「準結晶を描く」、金属、Vol.55, No.11,pp.50-56, (1985).
- 新宮秀夫、石原慶一「準安定平衡状態図」、日本金属学会会報、第25巻、pp.16-23,(1986).
- 石原慶一 「準結晶: 高次元結晶?」、月刊・フィジクス、Vol.8, No.6, pp.354-357,(1987).
- K.N.Ishihara, S.R.Nishitani and P.H.Shingu "Quasicrystal Formed by
RapidQuenching"Transaction of Iron and Steel Insitute of Japan, Vol.28, pp.2-6(1988).
- 石原慶一 「不思議な3次元」"Unique Characteristics of the 3-DimensionalWorld",Springer
Science, Nov. pp.17- 20, (1989).
- P.H.Shingu and K.N.Ishihara "Metastable Melting Phenomena and Solid
StateAmorphization(SSA) by Mechanical Alloying" Journal of Alloys and Compounds,194,pp.319-324
(1993).
- 田中武雄、石原慶一、新宮秀夫 「メカニカルアロイングによる準安定相形成」、鋳鍛造と熱処理、pp.7-12,(1993).
- 石原慶一 「金属間化合物結晶構造データベース:CRYSTMET」まてりあ、Vol.33,pp.1255-6,(1994).
- 大槻徴、新宮秀夫、石原慶一 「メカニカルアロイング(MA)による光人工格子の作成」、まてりあ、Vol.34,pp954-8,(1995).
- 石原慶一、大槻徴、新宮秀夫 「メカニカルアロイング(混合)の熱力学」、金属、Vol.65,pp.1001-6,(1995).
- 大槻徴、石原慶一、新宮秀夫 「光人工格子のMAによる作製」、金属、Vol.65,pp.1045-9,(1995).
- 石原慶一、大槻徴、新宮秀夫 「カオス材料〈くり返し圧延による多層膜材料の作成〉」、配管技術、517,Vol.39,No.10,pp.29-31,(1997).
- 石原慶一、大槻徴、新宮秀夫 「メカニカルアロイングの原理と応用」、機械の研究、第49巻第10号、pp.1027-31,(1997).
- 石原慶一 「消費社会とウェーバー・フェヒナーの法則」、環・京・NOW、No.9、pp.2-4、財団法人京都産業情報センター (1996)
- 石原慶一 「リサイクルについて」ニットウテクニカルレポート No.60(2000.7.1発行)
- 石原慶一 「ナノ材料の未来」、金属、vol.71,pp.65-67(2001)
- 石原慶一、新宮秀夫 「日本における鉄鋼業の基幹産業としての役割」ふぇらむ Vol.8,No.2,2003
- 醍醐市朗、石原慶一、足立芳寛 「鉄鋼業における循環型社会形成のための技術経営戦略 」 ふぇらむ Vol.8 No.12,45-48,2003
- 石原慶一 「環境機器・装置における環境の意味するところ 」化学装置3月号, (2006) pp.56-59
- 石原慶一 「環境保全のための機器・装置の役割 」 化学装置9月号別冊, (2006) pp.92-94